SR .75 "Production" preset noise

Hi !
Thanks for this post, very interesting (especially the last one)

chance, now all parameters can be changed in preset

i'll prepare a "0.52 like" preset. i'll post it in the share preset section of this forum.

in 0.75, irrmaps min and mare rate decrease is lower when resoution changes than 0.52. (was a request of many users)
also in 0.52 they were -4 -1 at 640*480 and now in 0.75 they are -3 -1 (due to black spots in certain situations)

but right now, you can modify (or create a new one) you preset like this :
- change color thr (production) from 0.2 to 0.3
- change irrmap -3 -1 to -4 -1, large areas will have less samples.

can you tell me your exact resolution render ? ike this i'll adjust the "resolution dependent settings" irrmap min and max rates (actually -0.6 when resolution double, you can try -0.8 or even -1, depends of your resolution)

anyway, i'll prepare this preset for you as soon as possible

Here's a 0.52_like preset..

almost same behavior than 0.52.. i've changed little things to make it more robust, but it's almost 0.52's one...

if it's ok for you, i'll post it in "share preset" section in this forum..
And if it's very good for all of us, i'll modify or add new presets in the next build.
the irradmap color thr seems to make very dense samples, even at 0.4 value.. so i've putted 0.5 at medium to have a sp2-like behavior.. not sure for the moment, i have to make more tests..

here's the preset file :

note : This preset seems to works just fine with new sp3 !!
to install the new preset, put the file into your maxroot\solidrocks\presets folder.

Waiting for your opinion