Splotches

Hello!

I can't seem to get rid of all these splotches (under the shelfs and on the post)

I have tried many different presets, and tried adjusting it manually.. but no luck...

I am still using SP2

any help would be great!



img155.imageshack.us/img155/4633/indoor32sr00051.jpg

Thanks for the reply.... that seemed to help alot

Here's the render with everything you said (DE and on production)


img221.imageshack.us/img221/6237/indoor32sr00054w.jpg

And here is one with DE Off


It has some pretty interesting differences... render time only went up by 2 minutes (20 mins total)

I wonder when I add all the furnature, glasses, tables, plates, ect... if render time will go up a higher precent when DE is on...

Just incase you need to see the rest of the scene.. here is a screen shot... there is alot of detail in the celing and the posts (i have show as a box on)

img221.imageshack.us/img221/8703/scr15d699b9.jpg

Here's a render using .52 preset, on production setting, with DE On, check samples off


There is still "some" splotches on the celing and on the posts.. but overall its good.

By the way, these are just temporary materials


img221.imageshack.us/img221/3689/indoor32sr00056.jpg

I have another question....


On the preset, when on production it has the IRRMap at like 100 and the LC at something like 1000 and global Subd at like 4

so when I look at the Vray settings, SR sets the IRRMap to 25 , and LC is at 1000 ....

Souldn't LC be set to 250 instead (250*4=1000) .... is it really using 1000*4= 4000???