- Posts: 6
- Thank you received: 0
- Home
- Forum
- SolidRocks / 3dsMax :: Public Section
- Technical questions
- Problem save button SR
Problem save button SR
- studiotetris
- Topic Author
- Offline
- New Member
Less
More
10 years 10 months ago - 10 years 10 months ago #5839
by studiotetris
Problem save button SR was created by studiotetris
SET
I use gamma 2.2 in 3dsmax for input and output 3dmax2013
In SR i deactivated button gamma for bypass.
I activated frame buffer and button srgb.
PROBLEM
When I save all the channel from 3dsmax all is ok but when I save (button) all the channel from SR the pictures are gamma 1.0...and when i open SR all the set of save channel in 3dsmax are overwritten and manually I have to reset all...
IDEA
For me SR don't "use system default gamma".
Is possible to be resolved?
Sorry for my bad English
Thanks
I use gamma 2.2 in 3dsmax for input and output 3dmax2013
In SR i deactivated button gamma for bypass.
I activated frame buffer and button srgb.
PROBLEM
When I save all the channel from 3dsmax all is ok but when I save (button) all the channel from SR the pictures are gamma 1.0...and when i open SR all the set of save channel in 3dsmax are overwritten and manually I have to reset all...
IDEA
For me SR don't "use system default gamma".
Is possible to be resolved?
Sorry for my bad English
Thanks
Last edit: 10 years 10 months ago by studiotetris.
Please Log in or Create an account to join the conversation.
- studiotetris
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
10 years 10 months ago #5847
by studiotetris
Replied by studiotetris on topic Re: PROBLEM AUTOSAVE
I can not solve the problem.
You can check that the save button of SR goes to get the gamma set in the output of the panel in 3dsmax?
Thanks
You can check that the save button of SR goes to get the gamma set in the output of the panel in 3dsmax?
Thanks
Please Log in or Create an account to join the conversation.
10 years 10 months ago #5850
by subburb
Replied by subburb on topic Re: PROBLEM AUTOSAVE
hello !
Are you using SR1.5 ?
problem is solved in this build, i'm pretty sure
Are you using SR1.5 ?
problem is solved in this build, i'm pretty sure
Please Log in or Create an account to join the conversation.
- studiotetris
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
10 years 10 months ago - 10 years 10 months ago #5856
by studiotetris
Replied by studiotetris on topic Re: Problem save button SR
I using SR 1.51 F
Last edit: 10 years 10 months ago by studiotetris.
Please Log in or Create an account to join the conversation.
- studiotetris
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
10 years 10 months ago #5864
by studiotetris
Replied by studiotetris on topic Re: Problem save button SR
I think I found the error...
If I save a tiff only with SR gamma and i don't open the setting of max is no correct (in the setting "save srgb" is no check).
If I check "save srgb" in 3dsmax the gamma is ok...
If I save a tiff only with SR gamma and i don't open the setting of max is no correct (in the setting "save srgb" is no check).
If I check "save srgb" in 3dsmax the gamma is ok...
Please Log in or Create an account to join the conversation.
- studiotetris
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
10 years 10 months ago #5865
by studiotetris
Replied by studiotetris on topic Re: Problem save button SR
I am in total confusion now, I try many test and I have many problems in properly configure the Gamma 2.2 settings in 3d max with solidrocks.
Could you explain to me how to make adjustments?
Thank you very much.
Could you explain to me how to make adjustments?
Thank you very much.
Please Log in or Create an account to join the conversation.
Time to create page: 0.364 seconds