- Posts: 11
- Thank you received: 0
- Home
- Forum
- SolidRocks / 3dsMax :: Public Section
- Whishlist
- Control over material!
Control over material!
13 years 3 months ago #3234
by Cypri
Replied by Cypri on topic Re:Control over material!
A partial adjustment possibility would be desirable. Especially if you have special materials such as glass were Subdiv are higher than other materials and you don´t want to reduce this with the recruitment of SR.
This idea with include/exclude materials will be very helpful, if it wouldn´t be so comlex.
But SR intervenses in all material in the same way and kind of settings. All SR setting with the material are same worse or good > there are no differences.
This idea with include/exclude materials will be very helpful, if it wouldn´t be so comlex.
But SR intervenses in all material in the same way and kind of settings. All SR setting with the material are same worse or good > there are no differences.
Please Log in or Create an account to join the conversation.
13 years 3 months ago #3235
by subburb
Replied by subburb on topic Re:Control over material!
i'll think about that proposal.
But you can also do the following :
In init save panel, click on "Apply optimisations to scene" for materials.
This will apply the SR settings to all material permanently to your scene.
Then in options panel, uncheck "auto glossies subdivs" into optimisation section.
Now SR will never change your material subdivs.
You can now adjust by hand desired materials.
Quite simple... no ?
But you can also do the following :
In init save panel, click on "Apply optimisations to scene" for materials.
This will apply the SR settings to all material permanently to your scene.
Then in options panel, uncheck "auto glossies subdivs" into optimisation section.
Now SR will never change your material subdivs.
You can now adjust by hand desired materials.
Quite simple... no ?
Please Log in or Create an account to join the conversation.
Time to create page: 0.126 seconds
