- Posts: 4
- Thank you received: 0
Setting up linear workflow :-)
15 years 4 months ago - 15 years 4 months ago #1396
by lopatam
Setting up linear workflow :-) was created by lopatam
My linear workflow is
Preference setting :gamma and lut 2.2 /affect color selector and material Editor both on
Bitmap :Input and output gamma 1
I put a 2.2 gamma on every imported bitmap manually .
Vray :
Linear multiply
Dark multiply 1.0
Bright multiply 1.0
Gamma 2.2
With this setting I don't need to activate Gamma Correct in SR .Right ?
In SolidRocks configuration,color mapping is User.
From my test I've the same image with Gamma Correct disabled .
Thanks and you 've done a great plug-in
Preference setting :gamma and lut 2.2 /affect color selector and material Editor both on
Bitmap :Input and output gamma 1
I put a 2.2 gamma on every imported bitmap manually .
Vray :
Linear multiply
Dark multiply 1.0
Bright multiply 1.0
Gamma 2.2
With this setting I don't need to activate Gamma Correct in SR .Right ?
In SolidRocks configuration,color mapping is User.
From my test I've the same image with Gamma Correct disabled .
Thanks and you 've done a great plug-in
Please Log in or Create an account to join the conversation.
15 years 4 months ago #1398
by subburb
Replied by subburb on topic Re:Setting up linear workflow :-)
thanks !
well.. it seems that your manual workflow is correct, but i can't say, because tthere are so many possibilities..
you can also always use the SR gamma correction, even with 1.0
Just like you want !
well.. it seems that your manual workflow is correct, but i can't say, because tthere are so many possibilities..
you can also always use the SR gamma correction, even with 1.0
Just like you want !
Please Log in or Create an account to join the conversation.
Time to create page: 0.213 seconds
