- Posts: 2
- Thank you received: 0
product rendering setup
14 years 7 months ago #1949
by subburb
Replied by subburb on topic Re:product rendering setup
Hi !
You should use the interior preset to be sure
the best method for this is universal settings (if you've some time of course)
If you're hurry you can try IM+Lc+DE for clean results, too.
If you're using Vray plane lights as master lights check that the option "Interp Vray lights in Irradmap" is OFF.
This option is here mainly if Vray plane lights are secondary (for example if used as skylight portal into window openings).
In your case it should be off.
Hope it helps !
You should use the interior preset to be sure
the best method for this is universal settings (if you've some time of course)
If you're hurry you can try IM+Lc+DE for clean results, too.
If you're using Vray plane lights as master lights check that the option "Interp Vray lights in Irradmap" is OFF.
This option is here mainly if Vray plane lights are secondary (for example if used as skylight portal into window openings).
In your case it should be off.
Hope it helps !
Please Log in or Create an account to join the conversation.
14 years 7 months ago #1951
by subburb
Replied by subburb on topic Re:product rendering setup
you're welcome
SolidRocks preview and Fastdraft quality are all the time Lc+Lc, whatever you method.
So just choose one method and stay on it. (universal or IM+LC+DE for example)
Then just adjust the quality slider depending of the needed quality.
(you can also use 1/4 or 1/2 buttons to get fast study renders)
About Camera :
Just like Vray, SolidRocks Works far better with Vray cams !
If you use Vraycam, you'll get the benefit of AutoExpo and auto white balance tools
for product viz i suggest to use gamma correction (something between 1.5 and 2.2)
Hope it helps !
SolidRocks preview and Fastdraft quality are all the time Lc+Lc, whatever you method.
So just choose one method and stay on it. (universal or IM+LC+DE for example)
Then just adjust the quality slider depending of the needed quality.
(you can also use 1/4 or 1/2 buttons to get fast study renders)
About Camera :
Just like Vray, SolidRocks Works far better with Vray cams !
If you use Vraycam, you'll get the benefit of AutoExpo and auto white balance tools
for product viz i suggest to use gamma correction (something between 1.5 and 2.2)
Hope it helps !
Please Log in or Create an account to join the conversation.
Time to create page: 0.157 seconds
